← All Briefings

Builders Risk Insurance on Federal Construction Contracts in 2026

Builders risk is the coverage federal contractors treat as an afterthought — a line on a certificate — right up until a fire or water loss turns a half-built facility into an open claim. On commercial work the exposure is familiar. On federal work it is governed by a different hand, and that hand is the contract itself.

Start with where the obligation originates. Under FAR 52.236-7, the contractor "shall also be responsible for all materials delivered and work performed until completion and acceptance of the entire work." That single sentence places the risk of loss squarely on the builder until the government signs for the project — not on the government, and not on the day the last subcontractor leaves. FAR Part 28.3 adds that although the government is "not ordinarily concerned with the contractor's insurance coverage" on a fixed-price job, in special circumstances — work on a government installation, government property in play — the agency may specify requirements, and FAR 52.228-5 then obliges the contractor to "provide and maintain... at least the kinds and minimum amounts of insurance required in the Schedule." The Corps of Engineers, GSA, and the installation commands layer their own supplements on top. The requirement is not something the carrier dictates. It is something the solicitation dictates, and the carrier must be made to match.

That distinction drives who gets named. A well-built builders risk policy carries a broad omnibus-insured clause — owner, general contractor, and subcontractors of every tier insured on one form, sparing you the thicket of additional-insured endorsements. On federal work the government's interest must be written in as well, as an insured or loss payee depending on the clause and agency supplement. A certificate that names the right parties while the policy behind it does not is not protection — it is paper.

Then come the exclusions that bite, and they bite hardest where contractors assume they are covered. Builders risk is all-risk property coverage: it answers for direct physical loss from fire, wind, theft, vandalism, and collapse unless something is specifically excluded. What is specifically excluded is the work itself. The cost of making good faulty workmanship, defective material, or flawed design is carved out, and the only question that matters is how far that carve-out reaches. This is the ground the LEG and DE clauses contest. LEG 1 excludes the defect entirely; LEG 2 pays for resulting damage but not the cost of the original defective element; LEG 3 reaches furthest, covering damaged property while excluding the cost of improving the deficient work. The distinction is not academic — a federal court called the LEG 3 wording "egregiously ambiguous" and "bordering incomprehensible," so a claim can turn on language few contractors read before binding. Flood and earthquake are rarely excluded outright but capped by sublimits far below full project value — a quiet ceiling on a federal site in a seismic zone or floodplain. And the losses that leave no debris — soft costs, delay-in-completion, loss of use — are extensions you must buy on purpose. When a covered loss pushes a federal completion date past its deadline, the liquidated-damages and financing exposure is real — but the policy answers for it only if someone asked it to.

Now layer in 2026. Tariff-driven material inflation has moved the number builders risk is supposed to track. AGC data through January 2026 shows aluminum mill shapes up 33% year over year, steel mill products up roughly 21% — some lines as much as 50% — and copper and brass up nearly 16%, with overall construction costs projected to rise about 8% and steel-intensive projects 15% to 25%. A policy written to completed value at bid is a policy written to yesterday's prices. On a $10 million project, material inflation of 8% to 15% can leave you $800,000 to $1.5 million short of the limit you need — a gap uncovered, almost always, at the claim. Carriers are answering with demands for updated appraisals and tighter agreed-value terms. The discipline is to revisit valuation mid-project, not at renewal.

Two programs, two philosophies. A project-specific policy is built for one job, with limits, term, and extensions matched to that contract — the right instrument for a large or long-duration federal build. A blanket or reporting-form program covers an ongoing book of smaller projects under one master policy, reported as they start, and leans on the contractor to report accurately and stay inside the per-project cap. Neither stands alone. Builders risk must be coordinated with the government-furnished property on site, which the clauses treat differently from the work itself, and with the GC's other coverages — general liability, the subcontractors' policies, the owner's program — so a single loss does not fall into the seam between two forms.

None of this is cause for alarm. It is cause for ownership. At Peoples First Tennessee, we work federal builders risk through our 4-Step Strategic Process — Strategic Discovery to read the solicitation and surface what the agency requires, Risk Assessment to measure your limits and named parties against the contract and against today's material costs, Solution Design to build the project-specific or blanket program that fits, and Ongoing Optimization to revisit valuation before inflation turns adequate coverage into a shortfall. The discipline is to carry the torch into the policy language before the loss, not after.

Sources: FAR 52.236-7 Permits and Responsibilities (Cornell Law); FAR 52.228-5 Insurance—Work on a Government Installation (Acquisition.gov); FAR 28.306 Insurance under fixed-price contracts (Acquisition.gov); When Federal Contracts Meet Insurance Coverage, Part 1 (National Law Review); Builders Risk Insurance: A Solution for Complex Construction Projects (NASBP); LEG3: A Turning Point for Construction Insurance? (Howden); Builder's Risk Insurance Coverages and Exclusions (The Hartford); How Tariffs Ripple Into Construction Costs and Insurance (Grit Insurance / AGC data)

— Ryan Mefford, President & Risk Advisor